booked.net
booked.net
For Furnace repair in Antigo WI, like us on Facebook!
See what your neighbors think about our Boiler service in White Lake WI on Google Reviews.
To schedule your Boiler installation in Elcho WI, just email us!

Installing Insulation on an Electric Hot Water Heater

Installing an Insulation Blanket on an Electric Water Heater

Note: Installation is more difficult on gas and oil-fired heaters. Ask a qualified HVAC contractor for instructions.

  1. Cut the tank top insulation to fit around the piping in the top of the tank. Tape the cut section closed after the top has been installed.
  2. Fold the corners of the tank top insulation down and tape to the sides of the tank.
  3. Position the insulating blanket around the circumference of the tank. For ease of installation, position the blanket so that the ends do not come together over the access panels in the side of the tank. Some tanks have only one access panel.
  4. Secure the blanket in place with the belts provided. Position the belts so they do not go over the access panels (Figure 2). Belts should fit snugly over the blanket but not compress it more than 15% to 20% of its thickness. The installation is easier with two people. If working alone, use tape to hold the blanket to the top until you get the belts into position.
  5. If your water heater has the temperature/ pressure relief valve and the overflow pipe on the side of the tank instead of on the top, install the blanket so these items are outside of the blanket. Depending on the piping arrangement and location, you may need to compress, or even cut, the blanket.
  6. Locate the four corners of the access panel(s). Make an x-shaped cut in the insulating blanket from corner to corner of each access panel.
  7. Fold the triangular flaps produced by the cuts underneath the insulating blanket. Repeat steps 6 and 7 for the rating/ instruction plate.
  8. The blanket must not be installed on a leaking tank.

© Online-Access

We specialize in Boiler service in Antigo WI so call Jerome Filbrandt Plumbing and Heating, Inc..
Contact Us To
Set Up an Appointment
 
 
Contact Info
 
Address:  908 Edison St.
Antigo, WI 54409
Connect With Us:
For Furnace repair in Antigo WI, like us on Facebook!
See what your neighbors think about our Boiler service in White Lake WI on Google Reviews.
To schedule your Boiler installation in Elcho WI, just email us!
 
 
Payment Options
 
For Furnace in Antigo WI, we accept most major credit cards.
 
We accept check for Boiler repair service provided in White Lake WI.
We accept cash for Water Heater repair service provided in Elcho WI.
 
We accept all major credit cards, cash and personal checks. We also have several financing options available through third party financing institutions.
Financing Options
 
Business Hours
 
Monday:  7:00am - 5:00pm
Tuesday:  7:00am - 5:00pm
Wednesday:  7:00am - 5:00pm
Thursday:  7:00am - 5:00pm
Friday:  7:00am - 5:00pm
Saturday:  Closed
Sunday:  Closed
Monday - Friday:  7:00am - 5:00pm
Schedule an Appointment
Home   |   Email Us   |   Schedule Service   |   Get a Quote   |   Maintenance   |   Guarantees   |   Employment
Get your Trane Furnace units service done in Antigo WI by Jerome Filbrandt Plumbing and Heating, Inc.
Jerome Filbrandt Plumbing and Heating, Inc. works with Kohler products in Elcho WI
Boiler repair service in White Lake WI
Home   |   Email Us   |   Schedule Service
Get a Quote   |   Maintenance   |   Guarantees
Employment   |   Search Site